Top Notch Info About How To Clean A Bathtub Drain

Steps for clearing a clogged bathtub drain.

How to clean a bathtub drain. Removing the drain stopper:begin by unscrewing or releasing the stopper mechanism using a screwdriver or pliers. Using a screwdriver or pliers, unscrew the fastening screw. Clean and remove the stopper and strainer.

In most cases, you’ll only need a screwdriver and a stiff wire or a bent coat hanger. Feed a drain snake down the overflow hole. Remove the gunk from the.

Deodorizing your bathtub drain 1. Keeping the stopper and strainer clean is a must when you plan to unclog your bathtub with baking soda and vinegar. Pour a cup (180 g) of baking soda into the drain and let it sit for 20 minutes.

Key takeaways understanding the type of bathtub drain you have is important for choosing the right tools and cleaning solutions. These innovative devices take the place of traditional plugs that are prone to tearing, warping, and even getting lost if they aren't kept securely fastened to the tub or sink. Unscrew the overflow plate from the end of the tub.

Tighten the thumbscrew to lock the snake in place, then crank the handle and push the snake down the drain. Of course, most people will skip to the next one, but this is surprisingly effective and removing bathtub clogs. © 2024 google llc this old house plumbing and heating expert richard trethewey shows how to fix a slow draining tub.

Empty the bath, and refill it (cold water is fine this time) let the jets run for 10 minutes more and then drain fully. Next, rinse any detergent scum or. Most clogged bathtub drains can be cleared with a plunger or by removing and cleaning out the tub stopper.

Make sure the drain stopper is in the open position. Twist the drain stopper counterclockwise while simultaneously pulling upward (gently!) to unfasten it from the screw holding it. Tubs have different types of drain stoppers depending on what kind of tub you have.

Any liquid dish detergent you have available will work. Then, pour a cup of baking soda down the drain. Use hot water to unclog your bath drain you will be surprised how often this works.

This will expose the drain flange, allowing access to the crossbar. It simply involves removing the overflow valve that is directly below the bathtub. Remove the drain stopper if you haven’t already so the soap gets inside the drain.

Then, pour boiling water down the drain again. Reach the stick into the drain to yank out deeper clogs. The soap lubricates the pipe walls, making the clog much easier to remove.